• Two T/R (RX) ports and 14 outputs
• Dual Low Band RF inputs support separate transceiver outputs or interstage filtering
• Industry-leading PAE for 3G/4G
• Optimized for APT DCDC operation
• Fully programmable Mobile Industry Processor Interface (MIPI) control
• MIPI programmable bias modes optimize best efficiency / linearity trade-off for 3G and 4G; minimizes DG09 for 3G.
• Small package: 4.0 mm × 6.8 mm × 0.73 mm, LGA 42 pad configuration
• Ultra low harmonics leakage from LB TX ports to MB TX ports, suitable for downlink carrier aggregation
• Multiband 3G / LTE handsets
• WCDMA Bands: I, II, III, IV, V, VIII, IX
• TD-SCDMA Bands: 34, 39
• FDD LTE Bands: 1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 25, 26, 28, 30, 71
• TDD LTE Bands: 34, 38, 39, 40, 41
• CDMA2000 Bands: BC0, BC1, BC4, BC6, BC010, BC015
3G/4G Modulation Scheme
• WCDMA Voice Release 99
• HSDPA categories
• HSUPA
• HSPA+
• TD-SCDMA
• LTE 1.4, 3, 5, 10, 15, 20 MHz Channel BW
• TDD-LTE
• CDMA2000
Figure 1 Functional Block Diagram.
- GROUP4G MMMB PA
- FUNCTIONPhase II, HB/MB/LB, 4HB/5MB/5LB
- PACKAGELGA 4.0 mm x 6.8 mm x 0.83 mm
